Industrial heating equipment from engine room to heat station
We undertake industrial heating in new facilities, existing halls and working sites. During the heating system construction, the connections of the heat-producing equipment, the heating spine, the distribution collectors and the heat-discharge circuits are adapted to the use of the building. A self-contained heating working part and other mechanical engineering applications are also compatible.
When preparing the work, we will review the areas to be heated, operating time, existing heat sources, available plans and connecting systems. Another design is required in a continuously used workspace, a warehouse or a periodic service building. These data may specify the declared installation content and the timetable for construction.
The heating pipework systems are designed to establish the planned trail, the supports, the lanes, the containment and evacuation points. The tube sections, shapes and assembly groups are prepared as far as possible in the workshop. On the site, we assemble and record the wires and prepare the welded or mounting connections according to documentation.
The connection of heat transmitters, pumps, dealer collectors and machinery equipment is managed together with the whole system. The access point, subsequent maintenance, insulation design and connection points for regulation are already taken into account in the installation. The boundaries of the electrical and control functions are clarified in advance by the related contractors.
When expanding or modernising existing heating systems, we specifically coordinate the separation of the affected circuits, the necessary stop and the status of connections. The working phases are adapted to the operation of the site; the connections of the new and remaining wiring sections are prepared on the basis of available technical data. Not only equipment, but the operation of the connected heating circuit is the starting point.
The installation shall be followed by checks, pressure tests, tasks related to filling and deprimand, if necessary, and transmission documentation. The tasks of setting up and putting into service shall be fixed according to the design, equipment requirements and the division of technical work. The special soil, rail and leaf heating systems of greenhouses are presented on a separate service page.
Alabama Szer Kft.













