Let's isolate the problem to be dealt with first.
Filtering and water treatment are often associated with the preparation of greenhouse. However, the choice must be defined for which derogation they are looking for and which point of use they want to influence. The visible contamination, the characteristic shown in the laboratory results and the technological requirement are not the same task. The investor shall request an interpretation showing the relationship between the problem and the desired result. A general list of equipment does not follow. The starting data and the treatment goal shall be recorded together with the water system specialist and the producer responsible.
Source and use combined
The choice of treatment is supported by the water source, volume demand, test state and intended use. If the source changes, the suitability of the earlier solution shall also be reassessed. M FAO Guidance and Dalsem a demonstration of water systems is a professional background for understanding relationships. The local offer shall include, regardless of the test result and use. The preliminary plan may include still uncertainties, which are described as part of the decision. It is not appropriate to treat the condition for which the source or the necessary test is still missing as a ready-to-take undertaking.
Relationship of treatment steps
In the case of several technological elements, the order of operation and the conditions between them shall be shown. The treatment steps may be transferred to a separate supplier and the responsibility of the transfer points may therefore be identified. The output of one device may be the next starting condition. In addition to the drawing, a short operating description will help you understand what case the entire system is working and when it stands in part. The operator shall know which measurement or signal is part of which stage. In the process, pipework systems, storage and automation also connect; these cannot remain unresolved intermediate tasks.
Access and maintenance task
The location of the selected equipment, together with its maintenance needs, should be designed. The elements, treatment points and test points to be exchanged shall be accessible. The necessary workspace shall be checked in addition to the other functions of the site and engine room. The tasks shall be adapted to describe the specific equipment and to the local operating environment. For the customer, it is also important what event indicates the need for maintenance, who does the task and where the result is recorded. A hard-to-reach filter or checkpoint may create an organisation problem during daily operation, regardless of nominal equipment performance.
The test should apply to the treatment undertaken.
The check of the transfer links the declared starting and expected status. The operating engine or display alone does not demonstrate that the water is suitable for the chosen use. The method of inspection and the necessary examination should therefore be consulted in advance. The documentation shall keep the condition of the device, the setting and the test results. Subsequent changes or system expansion may affect these conditions. The separation of screening and treatment thus does not complicate the investment, but makes it clear which element answers which question and up to which limit of responsibility it is committed to.
Questions to reconcile the project
- What specific water state or technological requirement justifies each treatment step?
- What is the transfer condition between the controls?
- What test or test confirms the commitment to use selected?
Professional background
The related international system solutions are provided by these primary manufacturers and execution sites. The decision aspects of the project shall be interpreted independently by the article; the specific size and content of the undertaking shall be clarified on the basis of the investment data.
development project preparation
The structure, engineering and on-site installation of the greenhouse is a coordinated working process. Learn the service area and compare the tasks of the planned investment.