
Project implemented
Complete greenhouse heating and mechanical installation in Fundulea
Alabama Szer Kft. completed the full installation of greenhouse heating and mechanical systems in Fundulea, Romania.
- Year completed
- 2021
- Site
- Fundulea, Románia
- Work completed
- Complete greenhouse heating and mechanical installation
In 2021, Alabama Szer Kft. carried out the full internal installation of greenhouse heating and mechanical systems in Fundulea, Romania. The on-site work included heating pipework, distribution pipes, growpipe heating pipes and related mechanical installation. We also provided material preparation, mobilisation of machinery and equipment, and organisation of the installation area. This project presents the full agreed mechanical scope together with its related tasks.
Greenhouse heating and mechanical installation in Romania
In 2021, we carried out greenhouse heating and mechanical installation in Fundulea, Romania. The task of Alabama Szer Kft. was the full on-site installation of the internal greenhouse heating system. We treated the work as one connected installation scope: the pipes, heating sections, distribution pipes and associated mechanical connections were installed to fit together. Each operation contributed to the same greenhouse heating system.
The project took place in a large, multi-bay greenhouse. At a horticultural facility of this scale, organised pipe installation and a consistent sequence of work are particularly important. The longitudinal pipes, heating pipes in the growing area and connecting sections form one mechanical network. We therefore present the Fundulea project through the installation of the entire internal system; material preparation and installation of supports were individual parts of this work.
The role of the heating network in greenhouse cultivation
The greenhouse heating pipework is a core mechanical system that supports the daily use of the horticultural facility. It delivers the available heat to the appropriate parts of the growing area. Pipe positioning follows the greenhouse structure, the space needed for cultivation and the associated service areas. Together, these conditions determine on-site work, access to pipe sections and the sequence of installation tasks.
In Fundulea, we installed the internal heating as a mechanical task linked to the greenhouse as a whole. What matters is how the different parts of the network connect, rather than individual components in isolation. A distribution pipe, heating section and connection perform different functions within the same system. The installation by Alabama Szer Kft. brought these connections together on site, based on the available technical documentation and the agreed scope of work.
Technical preparation and organisation of on-site work
On-site mechanical installation starts with reviewing the work and preparing the related tasks. Alongside the growpipe system, the Fundulea greenhouse heating documentation included distribution pipes, circuit connections and end-wall heating connections. The installation tasks had to be understood in relation to these system components. Preparation coordinated the pipe positions, structural fixing points and the conditions of the internal working area.
Access to installation areas, material handling and the sequence of operations all formed part of work planning. In a large greenhouse, preparing the pipes, moving them into position and completing assembly require different working conditions. We therefore treated construction as a coordinated process rather than a series of isolated tasks. We organised the on-site work around installation of the entire internal heating network so that pipe installation and related mechanical work could proceed in an orderly sequence.
Reviewing the system components shown in the documentation provided a common starting point for on-site installation. Alongside understanding the pipe routes and connections, adapting to the greenhouse environment was also important. The construction task took shape where the technical scope met the actual installation area: this determined the sequence for preparing materials, reaching the work positions and installing the pipes.
Distribution pipes and internal heating sections
A key part of internal greenhouse heating is the installation of distribution pipes and their connected heating sections. The longitudinal pipes connect the different points of the network, while the connecting sections link the system to the points where heat is released. In Fundulea, we handled changes of direction and branches alongside straight pipe runs as one installation task. The positions of the pipes had to follow the internal layout of the greenhouse.
Continuity of the pipe route and the position of connection points are both important during pipework installation. Each section fits the pipe sections before and after it rather than being made as an isolated component. This relationship determines the work along both long straight runs and more closely spaced connections. In the complete installation of the greenhouse heating network, preparing, assembling and connecting the pipes on site therefore formed a sequence of interdependent mechanical tasks.
Growpipe heating pipes in the growing area
The growpipe heating pipes were also part of the internal greenhouse heating system in Fundulea. These pipe sections occupy the growing area, so their installation is linked to the internal greenhouse structure and the available working space. During construction, the relationship between the pipes, their fixings and the connecting pipework had to be managed together. The aim was to install the part of the heating system shown in the documentation on site.
Installation of the growpipe network included positioning the heating pipes, connecting pipework and carrying out the associated installation operations. Preparing the supports secured the designated positions of the pipes and formed one part of the heating system installation. Connecting the pipe rows to their supply connections was part of the internal mechanical work. Alabama Szer Kft. carried out these on-site tasks in line with the entire agreed heating system, coordinating the affected greenhouse areas.
End-wall heating and mechanical connections
Alongside the longitudinal greenhouse heating sections, the Fundulea technical documentation included connections serving the end-wall area. Different greenhouse areas present different installation conditions: access beside a long internal pipe row differs from access at the end of the building or at a network connection point. The installation of the entire internal system had to accommodate these differences while maintaining the connections between the individual pipe sections.
Mechanical connections are junctions that require particular attention during construction. Pipe sections with different functions meet here, so the positions of the connections also affect the surrounding installation layout. In the Fundulea greenhouse, connecting the heating pipes and distribution pipes was part of our mechanical work. Creating the connected internal network required the connections and heating sections to fit together as one installation task. The pipework therefore had to be installed together with the surrounding network throughout construction.
On-site pipe installation and welding
Construction of the greenhouse heating network combines a sequence of installation operations. Preparing the pipes is followed by assembly, positioning and connection of the sections. Welding forms part of constructing the pipework network, and installation must suit the site conditions. In Fundulea, these tasks formed part of the full internal heating and mechanical installation, at different installation points within the same network.
Coordination of preparation and on-site installation is particularly important in larger greenhouse projects. Moving long pipe sections, providing access and reaching connection points affect the sequence of work. Welding equipment and consumables must be available in line with the installation schedule. In Fundulea, material preparation, pipe installation and welding formed a single construction process organised by Alabama Szer Kft. within its on-site work.
Mobilisation to the construction site in Romania
On-site preparation is an important condition for installation work abroad. Our own photographs of mobilisation in Fundulea show a site container, a scissor lift and a material-handling machine. These photographs document the working environment at the start of the project. Transport of machinery and equipment had to fit the greenhouse installation schedule so that the necessary site resources were available for installing the pipes.
Following mobilisation, positioning equipment and handling materials became part of the daily organisation of work. The site container provided a base for installation equipment, the lifting equipment provided access to elevated work positions, and the loader assisted with material handling. We treated these tasks as part of the full mechanical installation. Organising work at a distant site therefore meant ensuring the conditions for actual pipe installation and welding, as well as arranging travel to the site.
Coordinated installation work areas
In a multi-bay greenhouse, mechanical work progresses in several connected areas. Pipe material may be prepared in one area while an assembled pipe section is positioned or connections are installed elsewhere. The work process therefore has to be reviewed in relation to the entire internal network. In Fundulea, the connections between installation areas and internal access routes were also daily requirements for construction.
In the on-site work of Alabama Szer Kft., construction of the heating pipework and the associated mechanical tasks formed a coordinated process. Site conditions, prepared materials and the available machinery access had to suit the next installation operation. This approach matters in a large greenhouse because the individual tasks together create the entire agreed system. The project is therefore best understood through the internal heating network as a whole.
Complete internal greenhouse mechanical works
The Fundulea project presents the greenhouse heating and mechanical installation carried out by Alabama Szer Kft. The agreed scope covered the coordinated installation of the internal heating pipework, distribution pipes, heating sections in the growing area and associated on-site work. Complete installation here means delivery of the agreed internal mechanical system. Supports, connections and preparatory operations were components of this coordinated work.
The value of complete mechanical installation lies in coordinating the different parts of the work. Pipes, heating sections and connections form a common network, and on-site installation must follow that relationship. In Fundulea, installing the heating system involved tasks from mobilisation and material preparation through on-site pipe assembly. For the client, this meant orderly delivery of the agreed internal mechanical works, with the individual installation tasks managed together.
Greenhouse construction experience in Hungary and across Europe
The 2021 work in Fundulea is one of our greenhouse projects in Romania. We also apply the experience gained in greenhouse heating and mechanical installation in Hungary to horticultural developments abroad. Regardless of location, the task requires a precise understanding of the technical scope, organisation of installation and coordination of the agreed work. An overseas project also requires arrangements for transport, mobilisation of machinery and work at a more distant site.
Alabama Szer Kft. undertakes greenhouse heating and mechanical installation primarily in Hungary and also across Europe. The Fundulea project illustrates how internal pipe installation, welding, mechanical connections and on-site work organisation fit together within a larger horticultural project. A clear scope and coordinated construction under one contractor matter to the client; these are also the focus of this project presentation.
On-site photographs of the Fundulea project




Alabama Szer Kft.













